Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi
Nanoenvi IAQ™ Wi-Fi

Nanoenvi IAQ™ Wi-Fi

NE-IAQ-W

Nanoenvi IAQ™ Wi-Fi

Step into the forefront of air quality monitoring with the Nanoenvi IAQ™, a comprehensive indoor air quality and comfort sensor, proudly designed and manufactured in Spain. Envira IoT redefines air quality monitoring by focusing on efficiency and versatility, and thanks to its compact and functional design, it is the perfect solution for schools, offices, public buildings and any workplace where air quality is paramount.

The Nanoenvi IAQ™ sensor is highly accurate and provides exceptional monitoring of temperature, humidity, PIR, light, CO2, formaldehyde/ozone, barometric pressure and TVOC levels. In addition, this instrument not only measures PM1, PM2.5, PM4 and PM10 particulate matter, but also offers additional options for monitoring carbon monoxide and noise levels.

The most accurate information about the air quality in your rooms is always at your fingertips.

 

Video

Especificaciones

General
Power in 100-240V AC @ 50-60 Hz (power supply included)
Maximum power consumption 5 W
Average power consumption 2.5 W
Environmental operating conditions 10 ~ 55ºC / 5 ~ 90 % RH (no condensation)
Storage environmental conditions 10 ~ 55ºC / 5 ~ 90 % RH (no condensation)
IP rating IP21
Sensors CO (optional), CO2, atmospheric pressure, COVs, PM1, PM2.5, PM4, PM10, temperature, humidity and noise (optional)
Package weight 800 g
Device weight 340 g
Dimensions 189x189x37 mm
CO sensor specifications
Accuracy ± 5%
Measuring range 0 ~ 5000 ppm
Operating temperature -10 ~50 ºC, 10 ~95 % RH
Calibration Initial laboratory calibration
Response time 60 seconds
Technology Electrochemical
CO2 sensor specifications
Accuracy ± 30 ppm
Measuring range 400 ~ 10000 ppm
Operating temperature 0 ~50ºC, 0 ~95% RH
Calibration Self-calibration
Response time 20 seconds (63%)
Technology NDIR
PM Sensor Specifications
Accuracy for PM1 and PM2.5 ±10 µg/m3 for measurements between 0 and 100 µg/m3 and ±10 % for measurements between 100 and 1000 µg/m3
Accuracy for PM4 y PM10 ±15 µg/m3 for measurements between 0 and 100 µg/m3 and ±15 % for measurements between 100 and 1000 µg/m3
Measuring range 0 ~1000 µg/m3
Operating conditions -10 ~ 60 ºC y 0 ~ 95 % RH
Calibraction Initial factory calibration
Response time 1 s
Pressure sensor specifications
Accuracy ±10 hPa
Measuring range 500 hPa a 1150 hPa
Operating temperature -40 a 105ºC
Calibration Initial factory calibration
Reponse time Unknown
Temperature sensor specifications
Accuracy ± 1º C
Measuring range 0 ~65 ºC
Operating conditions 0 ~100 % RH/ -20 ~ 85 ºC
Calibration Not required
Response time 8 s
Relative humidity sensor specifications
Accuracy ±5 % RH
Measuring range 10 ~95 % RH
Operating conditions 0 ~100 % RH/ -20 ~ 85ºC
Calibration Not required
Response time 8 s
VOC sensor specifications
Accuracy 30% above measured value
Measuring range 0 ~ 60000 ppb
Operating conditions 5 ~90 % RH/ 5 ~55ºC
Calibration Self-calibration
Response time menor de 30 s
Technology Metal oxide
Noise sensor specifications
Accuracy Not characterized, qualitative measurement
Measuring range 0 ~ 100 % noise level
Operating conditions 0 ~ 95 % RH/ 0 ~ 60 ºC
Calibration Initial factory calibration
Frequency range 20 - 20000 Hz
Wi-Fi communication
Range Depending on the strength level of the WiFi network to which it is connected
Frequency 2.4 GHz
Data sending period Adjustable. Minimum 40 seconds

Features

Wi-Fi environmental monitoring sensor

Featuring 9 sensors in 1, this state-of-the-art sensor provides you with accurate real-time data on a range of environmental factors, such as CO2, PM2.5 and PM10, TVOC, O3, etc.

iaq sensor
3D ToF

Simple installation

Nanoenvi IAQ™ redefines ease of use with its design focused on quick and easy installation. Through its USB port, you can configure the device prior to mounting. Most impressive is its ability to adapt and self-correct: once installed, it will uninterruptedly measure air quality, autonomously managing its reconnection upon any failure in the communications network or power supply. The Nanoenvi IAQ™ is autonomous, reliable and always ready to work!

Zero maintenance and remote control:

Say goodbye to cost overruns and travel with Nanoenvi IAQ™. This device requires no specific maintenance and allows full remote control. With its ability to send configuration messages, you can know the status of the device, update the software or change its configuration at any time and from anywhere. Building managers and integrators can maintain full control over installed devices without additional effort or expense.

iaq sensor
3D ToF

Unmatched accuracy and reliability

Nanoenvi IAQ™ incorporates the latest technology in indoor air quality measurement, ensuring exceptional accuracy and reliability. Envira Sostenible S.A. relies on renowned European manufacturers offering state-of-the-art technology, meeting the highest quality standards. With the Nanoenvi IAQ™, you get not only data, but the confidence of having accurate and reliable information at your fingertips.

Air quality traffic light

With Nanoenvi IAQ™, air quality has never been easier to understand. Thanks to a system of lights that change color depending on air quality, anyone can instantly know the air conditions in their environment. This "traffic light" system transforms complex data into simple visual information, enabling proper and efficient ventilation in real time. With Nanoenvi IAQ™, air quality becomes a language that everyone can understand and act upon to breathe healthier.

iaq sensor
3D ToF

Flexibility and data ownership with MQTT:

Nanoenvi IAQ™ employs the MQTT protocol, a widely recognized and trusted standard for sending data. At the time of installation, you can configure the MQTT server that will receive the data, ensuring that you always own your own data and can use it according to your needs. If you have any questions about how to view or use the data collected by the Nanoenvi IAQ™, do not hesitate to contact your distributor. With the Nanoenvi IAQ™, you will not only have in your hands a powerful air quality monitoring tool, but also a reliable partner for an efficient and customized management of your spaces.

Suggested uses:

An immediate use case would be in libraries, a place where high concentrations of CO2 and VOCs can accumulate, which can cause a decrease in the cognitive activity of users.

biblioteca
hospital

In hospitals, air is the major vehicle for the transmission of microorganisms, so it is important to measure automatically and by zones the risks of transmission through the ventilation parameters of rooms.

In schools, it can help maintain a pleasant study environment and optimize the cognitive abilities of students.

colegios
hoteles

If one of the hallmarks of your hotel is quality, you already have a way to show the quality of your to show the quality of the air to your guests.

Keep your employees working at the highest level by providing a comfort-enhancing environment that increases comfort by installing it in your offices.

oficinas

ENVIRA is a company with more than 30 years of experience in the provision of environmental services, both to public administrations and to companies. It was created in 2015 after the reorganization of Ingenieros Asesores, S.A., a company founded in 1985 and a pioneer and benchmark in its sector.

Product added to compare.

This online shop uses own and third party cookies to collect information to improve our services and for the analysis of browsing habits. We share information about your use of the website with our social media, advertising and web analytics partners.